Fonte de alimentação regulável 30V 30A com display digital Mlink KPS3030DA

Es recomana la neteja periòdica de les reixetes de ventilació i verificar l’absència de pols als ventiladors per evitar sobreescalfament. És aconsellable calibrar anualment l’equip si s’utilitza per a mesura de precisió i mantenir-lo en ambients secs i fora del rang d’humitat alta. No exposar-lo a sobrecàrregues prolongades ajuda a preservar-ne la vida útil. No requereix peces de recanvi freqüents.

Periodic cleaning of the ventilation grilles is recommended, and you should check that there is no dust in the fans to prevent overheating. It is advisable to calibrate the unit annually if it is used for precision measurement, and to keep it in dry environments away from high humidity. Avoid prolonged overloads to help preserve its service life. It does not require frequent replacement parts.

The KPS3030DA offers precise, continuous regulation of both voltage (0-30 V) and current (0-30 A), which sets it apart from unregulated power supplies that only provide fixed values. It also has a digital LED display for real-time monitoring and advanced protection methods (against overload, overheating and short circuit), improving safety and versatility for laboratories, production and teaching.

The approximate dimensions of the KPS3030DA are 390 x 250 x 200 mm. The typical weight of similar products is around 8-12 kg, although the exact weight may depend on the manufacturer; the main materials are usually painted steel and industrial electronic components. The box includes the power supply, mains cable, English manual and a pair of output leads. Additional accessories are not usually included.

The KPS3030DA requires a 230 V ±10%, 50 Hz AC mains socket. It is essential to ensure that the installation is properly earthed and that the sockets can handle the maximum demand (approx. 5 A considering the 900 W maximum power). It is recommended to avoid low-quality adapters and to respect the connection polarity on the load.

It operates in an ambient temperature range of 0-40°C and relative humidity of up to 80%. The specified display accuracy is ±0.1 V (voltage, ±2 digits) and ±0.1 A (current, ±3 digits). However, there may be small variations due to component tolerances under loads close to the maximum limit.

Periodic cleaning of the ventilation grilles is recommended, and you should check that there is no dust in the fans to prevent overheating. It is advisable to calibrate the unit annually if it is used for precision measurement, and to keep it in dry environments away from high humidity. Avoid prolonged overloads to help preserve its service life. It does not require frequent replacement parts.

The KPS3030DA offers precise, continuous regulation of both voltage (0-30 V) and current (0-30 A), which sets it apart from unregulated power supplies that only provide fixed values. It also has a digital LED display for real-time monitoring and advanced protection methods (against overload, overheating and short circuit), improving safety and versatility for laboratories, production and teaching.

The approximate dimensions of the KPS3030DA are 390 x 250 x 200 mm. The typical weight of similar products is around 8-12 kg, although the exact weight may depend on the manufacturer; the main materials are usually painted steel and industrial electronic components. The box includes the power supply, mains cable, English manual and a pair of output leads. Additional accessories are not usually included.

The KPS3030DA requires a 230 V AC supply ±10%, 50 Hz. It is essential to ensure the installation is properly earthed and that the sockets can handle the maximum demand (approx. 5 A, considering the 900 W maximum power). It is recommended to avoid low-quality adapters and to respect the connection polarity at the load.