Adaptador Lightning fêmea de 8 pinos para Micro USB macho

L’adaptador està fabricat habitualment en plàstic ABS i els seus contactes probablement són d’aliatge metàl·lic amb bany de níquel. Les dimensions estàndard d’aquest tipus d’adaptadors oscil·len entre 25-30 mm de longitud, 10 mm d’amplada i 5 mm de gruix, amb un pes inferior a 10 g. No inclou accessoris addicionals a la caixa.

Aquest model d’adaptador genèric sol suportar fins a 2,1 A a 5 V, suficient per a la majoria de carregadors i dispositius convencionals Micro USB. No és apte per a càrrega ràpida superior a 10 W ni per a protocols com Qualcomm Quick Charge o altres de similars.

Els problemes més freqüents inclouen que el dispositiu no es reconegui o que la càrrega sigui lenta. Això pot deure’s a contactes bruts, desgast dels terminals o incompatibilitat amb alguns accessoris que requereixen característiques específiques. Es recomana netejar els contactes amb un drap sec i assegurar-se de no forçar el connector. Si persisteix, proveu amb un altre cable o font d’alimentació.

The adapter is commonly made from ABS plastic and its contacts are likely to be a metal alloy with nickel plating. Standard dimensions for this type of adapter range from 25-30 mm in length, 10 mm in width and 5 mm in thickness, with a weight of less than 10 g. No additional accessories are included in the box.

This generic adapter model usually supports up to 2.1 A at 5 V, which is sufficient for most conventional Micro USB chargers and devices. It is not suitable for fast charging above 10 W or for protocols such as Qualcomm Quick Charge or similar.

The most common issues are the device not being recognised or slow charging. This may be due to dirty contacts, worn terminals or incompatibility with some accessories that require specific characteristics. It is advisable to clean the contacts with a dry cloth and make sure not to force the connector. If the problem persists, try another cable or power supply.

The adapter is commonly made from ABS plastic and its contacts are likely to be metal alloy with nickel plating. Standard dimensions for this type of adapter are around 25–30 mm in length, 10 mm in width and 5 mm in thickness, with a weight of under 10 g. No additional accessories are included in the box.

This generic adapter model usually supports up to 2.1 A at 5 V, which is sufficient for most conventional Micro USB chargers and devices. It is not suitable for fast charging above 10 W or for protocols such as Qualcomm Quick Charge or similar.

The most common issues are the device not being recognised or slow charging. This may be due to dirty contacts, worn terminals or incompatibility with some accessories that require specific characteristics. It is advisable to clean the contacts with a dry cloth and make sure not to force the connector. If the issue persists, try another cable or power supply.

Adaptern är vanligtvis tillverkad av ABS-plast och kontakterna är sannolikt av metalllegering med nickelplätering. Standardmåtten för denna typ av adapter ligger mellan 25–30 mm i längd, 10 mm i bredd och 5 mm i tjocklek, med en vikt under 10 g. Inga extra tillbehör ingår i kartongen.